Getting rid of grey facial hair without spending too much time can be a challenge, but we found the Just For Men M45 a straightforward option. After using it ourselves, the application process proved pretty simple with the included brush, and the results blended well for a natural look.
The colour took around five minutes to set, and the beard felt softer thanks to the conditioning ingredients. It doesn’t last forever, so regular touch-ups are necessary, but it does give a thicker appearance by covering the grey effectively.
Overview of Just For Men Moustache & Beard M45 – Dark Brown Black
We found this beard dye straightforward to apply, with the included brush making coverage precise and comfortable. The gel formula softened coarse facial hair, which helped in reducing itchiness after coloring. The colour matched well with darker hair tones, providing a natural look without obvious patches.
It works quickly, showing results in about five minutes, but some of us noticed the colour faded after a couple of weeks, requiring touch-ups. The dye does a solid job covering grey hair, though it may need careful application to avoid uneven spots. Overall, it’s effective for maintaining a fuller, darker beard with minimal hassle.
Instant and Natural-Looking Grey Coverage
We found the color gel blends quickly, covering grey hairs in about five minutes without leaving an artificial look. The shade we tried matches well with natural dark tones, creating a fuller and thicker appearance. Application with the included brush is straightforward, allowing for precise coverage on coarse facial hair.
The finish is matte and soft, avoiding any awkward shiny or patchy spots. However, it takes careful mixing and timing to avoid uneven color, so following instructions is important. Overall, the coverage feels natural and holds up for several weeks before regrowth shows.
Simple Five-Minute Application
We found the application process straightforward and quick, taking about five minutes from start to finish. Mixing the color base with the developer was easy, and the included brush helped us apply the dye evenly without mess.
Waiting just five minutes felt efficient, especially compared to longer treatments. Rinsing off the product was simple, and the instructions were clear enough to avoid confusion. One downside is the need to follow every step carefully to avoid uneven coloring. Overall, the process fits well into a busy routine without being time-consuming.
Formulated for Coarse Facial Hair
We found this dye addresses the unique challenges posed by coarse facial hair better than many general hair dyes. Its gel consistency and ingredient mix help the colour spread evenly, coating thick strands without clumping or patchiness. This makes greys blend in naturally while maintaining a fuller look.
The product includes oils and biotin that seem to soften stiff hairs during application, reducing irritation. However, it still requires careful timing and application to avoid uneven colour, especially on particularly dense or wiry patches.
Pros:
- Designed for tough, coarse hair texture
- Smooth, even colour distribution
- Contains conditioning agents
Cons:
- Needs precise application to prevent streaks
- Slight learning curve on how long to leave on for thickest areas
Overall, it’s a practical choice if you struggle with grey in thick facial hair.
Conditioning Ingredients and Skin Comfort
The formula includes natural conditioners like aloe vera, coconut oil, and colloidal oatmeal, which help soften coarse facial hair during application. We noticed that, unlike some harsher dyes, this product didn’t leave our skin feeling overly dry or itchy after use.
The inclusion of biotin seems beneficial, contributing to a smoother beard texture post-coloring. However, some users might still experience mild irritation, so performing a patch test is wise.
In terms of comfort, the gel consistency spreads easily with the brush, making it less messy and more controlled. Overall, the conditioning blend strikes a reasonable balance between effective coloring and maintaining skin comfort.
Versatile Shade Selection and Usage Recommendations
Choosing the right shade is essential to achieving a natural look with this dye. We found that opting for a lighter shade when uncertain helps avoid overly dark results that can appear unnatural or harsh. The product offers seven shades, covering everything from blond to black, which works well across different beard colors and skin tones.
Using the included brush makes application more precise, especially around the mustache and smaller facial hair areas. The formula’s quick five-minute processing time is convenient, but consistent timing is important to avoid uneven tones.
Tips for best results:
- Always do a skin test 48 hours before use to prevent irritation.
- Use gloves to avoid staining hands.
- Reapply as needed to maintain coverage, since grey grows back at different rates.
Overall, the shade variety and usage instructions strike a good balance between flexibility and ease of use.
Real User Experiences
When we tried this beard dye, it stood out for how well it covers grey hairs without looking artificial. The color blends naturally, especially in the dark brown-black shade, giving a fuller and more uniform appearance.
Application is straightforward with the included brush, usually taking about five to fifteen minutes. Some find the color fades faster than expected, which may require more frequent touch-ups, particularly on shorter or sparser beards.
Pros:
- Effective grey coverage
- Natural-looking finish
- Easy to apply with precise brush
Cons:
- Color may wash out relatively quickly
- Some users needed longer application times than suggested
Overall, it works well if you’re looking for simple, reliable beard coloring with a natural result.
Detailed Review
After spending some time with this beard dye, we found it straightforward enough for regular use. The gel formula applies easily with the included brush, and the color blends naturally with coarser facial hair. The quick five-minute wait time is convenient, making it suitable for busy routines.
The dye effectively covers grey hairs, enhancing the beard’s fullness without leaving a patchy or artificial look. The conditioning ingredients like biotin and aloe help keep the beard soft instead of harsh or stiff, which is a notable advantage over other products we’ve tried.
Pros
- Simple Application: The brush and gel mix apply smoothly and control the color well.
- Natural Finish: The dark brown-black shade blends seamlessly with natural beard tones.
- Fast Processing: Only about five minutes needed before rinsing, fitting into a quick grooming schedule.
- Softening Effect: Conditioning agents reduce itching and dryness often caused by dyes.
- Lasting Coverage: Grey hairs stay covered for weeks until new growth appears.
Cons
- Color Fade: For some, the color may wash out quicker than expected, especially on shorter or trimmed beards.
- Limited Volume: The 28g tube provides around three uses, which might be insufficient for thicker or larger beards.
- Initial Mixing: Some users might find the two-part mixing process a bit fiddly at first.
- Skin Sensitivity: A patch test is necessary due to potential irritation or allergic reaction from dye ingredients.
Overall, this product fits well for those looking for a reliable and user-friendly beard dye that balances coverage with beard care. It requires some care in application and upkeep but delivers consistent and natural results.
Tips for Best Results
When using this beard dye, patience is key. We found that sticking closely to the recommended five-minute application gives a good natural look, but if your facial hair is thicker, allowing a little extra time can improve coverage—just watch for any skin irritation.
Mix the dye thoroughly before applying and use the included brush to spread it evenly. Gloves are essential to avoid stains, and doing a patch test 48 hours prior is important to prevent allergic reactions.
For color choice, if unsure, going lighter than your natural shade helps avoid an overly harsh appearance. Regular touch-ups keep the color looking fresh, especially since fading can happen quicker on coarse or frequently washed beards.
Who should buy this?
We found this product suited for those who want a simple way to cover grey in facial hair without a lengthy process. If your beard or mustache is coarse and patchy with grey, this dye helps create a thicker, fuller appearance.
It works well for men who prefer a quick routine—just mix, brush on, wait five minutes, and rinse. Those who want natural-looking results and some conditioning benefits will appreciate the added biotin and aloe.
However, if you’re sensitive to chemicals or new to hair dye, patience is needed to get right. Also, anyone wanting frequent use will like that one box allows multiple applications for maintenance.
If you want an easy-to-use beard dye that covers grey and softens coarse hair, this one is worth trying. It won’t be a permanent fix but works well for maintaining a consistent darker tone.
Consider giving it a go to see if it fits your routine. Buy it here on Amazon.
Frequently Asked Questions (FAQs)
Just For Men M45 – Dark Brown Black Review
1. How long does the color last?
The color typically lasts for 1–2 weeks, depending on beard washing frequency and hair growth rate. Touch-ups are recommended as grey hairs grow back.
2. How long does the application process take?
The dye sets in approximately 5 minutes. Including prep and rinsing, the full process takes around 10–15 minutes.
3. Is it suitable for coarse or wiry beards?
Yes. The formula is designed for coarse facial hair, and it includes conditioners like aloe vera and biotin to soften the beard.
4. Does it look natural or fake?
When applied correctly, the dark brown-black shade blends well with natural facial hair for a fuller, natural-looking finish.
5. Does it cause skin irritation?
Most users do not report irritation, but a patch test 48 hours before use is strongly recommended to rule out allergies.
6. Can I use it on my mustache too?
Yes. The product is formulated for both beards and mustaches. The included brush helps with precise application in smaller areas.
7. How many uses do you get from one box?
Each 28g tube offers approximately 2–3 applications, depending on beard size and coverage needs.
8. Does it come in other shades?
Yes. Just For Men offers a range of 7 shades from blond to black. Choosing a slightly lighter shade is advised if you’re unsure.
9. Is it messy or hard to apply?
The gel formula is easy to apply using the included brush. Gloves are included to prevent staining, and cleanup is minimal.
10. Can I apply it if I’ve never dyed facial hair before?
Yes, but follow the instructions closely. There’s a slight learning curve, especially when mixing and timing for thick areas.
Conclusion
After trying this beard dye ourselves, we found it generally effective at covering grey hairs and blending naturally with darker shades. The application process is straightforward, and the included brush helps with precision.
However, the color may require a slightly longer waiting time than suggested to achieve the best results, and it might not last as long as some expect, needing more frequent touch-ups.
Pros:
- Good grey coverage
- Easy to apply
- Natural finish
Cons:
- Slightly longer processing time
- Fades quicker than some alternatives
Overall, this product works well for those wanting a quick, natural way to maintain a fuller-looking beard, but managing expectations on durability is important.
As an Amazon Associate, I earn from qualifying purchases.
